|
November 29, 2007 - IC Plus introduces:
IP210S Web server and Serial to Ethernet Controller
General Description :
The IP210S is a very cost effective product and a highly integrated Ethernet transceiver, 64k bytes OTP, 32K bytes SRAM, 8 channel 10bit ADC, 10/100Mbps Ethernet MAC, offload engine and a 8051 for RS-232 to Ethernet and Web Controller applications.
The IP210S can use internal OTP and SRAM to run program also. It supports a 1 Mbps high speed UART, two normal speed Rs-232 and a 10bit ADC channel for industrial remote monitoring application.
Features :
- Built in an 8051
- Built in 32k byte SSRAM Macro
- Built in 64k byte OTP for micro-controller AP
- Built in a 10/100 Ethernet MAC
- Built in a 10/100 Ethernet PHY
- Built in a 4 channel DMA:
- Built in a 8-bits 8 channel ADC(0V~2.5V)
- Built in PLL to generate system clock
- Program starts at bank 0 0xFFFD
- Support external Flash I/F
- Support one MII/reverse MII or RMII
- Support one SMI (MDC/MDIO)
- Support EEPROM I/F
- Support 3 timers
two 8-bit h/w auto load timers (13-bit/16-bit non-auto load timer)
one 16-bit h/w auto load timer
- Support a high speed (up to 1Mbps) UART I/F
- Support 2 RS232
- Support two MII mode (one MAC & one PHY)
- Software Protocol Support ARP, ICMP, TCP/IP, UDP, HTTP server, TFTP server, DHCP client, Telnet server/client and SMTP
- Support Telnet, VCOM
- 0.25um CMOS technology
- 2.5V core and 3.3V (2.5V) IO power
- 128 pin package
|
